TP-Link Router Login – Default IP, User ID, Password

TP-Link stands for Twisted Pair Link which is one kind of cable that helps to reduce electromagnetic interference, “TP” is the company name of the router. To Connect the TP-Link router login to the Ethernet cable on the control panel. First, connect it to the specific area of the network using the TP-LINK. The network name is called SSID and the admin password is printed on the back screen of your router.

For TP-Link router Login, 192.168.0.1 is the local IP address of Linksys routers and some other alternatives of this router. It is a private IP address used by private networks that range from 192.168.0.0 and ends with 192.168.255.255. This IP provides the access to configure, setup, modify and change the admin settings whenever needed. sometimes 192.168.0.254 is also used as a default IP address of the TP-Link router privately. Some of the alternatives of tp-link router are D-Link, Verizon, Hitron, Windstream, Comcast, Belkin, and many more.

Steps for TP-Link Router Login

Steps to login TP-Link router are the following:

1. Connect to your specific tp-link browser
2. Navigate to IP address shows on the address bar
3. Enter the respective login details of your router
4. Configure or set up your router settings

1. Connect to your specific TP-Link browser

To start the login process, first, you have to make a connection to the network using ethernet cable or wifi to access the TP-Link router. If you don’t know your router password then prefer to use an ethernet cable because it doesn’t require any password.

2. Navigate to IP address shows on the address bar

After making a connection, you directly navigate to your IP address page, where you have to enter the default IP address 192.168.0.1 and 192.168.0.254, You can also open it by using the specific link http://192.168.0.1 and http://192.168.0.254

3. Enter the respective login details of your router

After entering the IP address, you directly go to the login screen, where you have to enter your login details like username and password shows at the back screen of the router which is the following:

Username: admin
Password: admin

4. Configure or set up your router settings

After login in successfully to your router, you can easily configure, change and reset your router setting wherever required.

Default Login of TP-Link Routers (IP, Username, and password)

Model	IP Address	Username	Password
AC1750		admin	admin
AD7200	http://192.168.0.1	admin	admin
Archer C1200	http://192.168.0.1	admin	admin
Archer C2	http://192.168.0.1	admin	admin
Archer C20		admin	admin
Archer C20i		admin	admin
Archer C2300
Archer C2600	http://192.168.0.1	admin	admin
Archer C3150
Archer C3200	http://192.168.0.1	admin	admin
Archer C4000
Archer C5	http://192.168.0.1	admin	admin
Archer C50		admin	admin
Archer C5400		admin	admin
Archer C58	http://192.168.0.1	admin	admin
Archer C59	http://192.168.0.1	admin	admin
Archer C60	http://192.168.1.1	admin	admin
Archer C7	http://192.168.0.1	admin	admin
Archer C8	http://192.168.0.1	admin	admin
Archer C9	http://192.168.0.1	admin	admin
Archer CR500		admin	admin
Archer CR700		admin	admin
Archer D2
Archer D5		admin	admin
Archer D7	http://192.168.1.1	admin	admin
Archer D9	http://192.168.0.1	admin	admin
Archer MR200		admin	admin
Archer T1U
Archer T2U
Archer T4U
Archer T6E
Archer T8E

Some Frequently asked questions about TP-Link Router

1. How to reset your TP-Link router?

Steps to reset your TP-Link router are the following:

• Using the reset button, press a small thin object(with the help of a needle, pen, and pencil) to go back on your pc.
• Hold the button for at least  10 to 15 seconds and then release and restart the device accordingly.
•  While resetting, Don’t hold the button for more than 15 seconds.
• After pressing the button for more than 15 seconds will already set the default factory settings
• Before redirecting on further steps, Wait for at least 2 minutes to provide access to your business gateway.
• In your device, search the SSID(Service Set Identifier) network type. 
• Connect the device to your specific business network.
• After making a connection successfully, you will be redirected to the following screen.

2. How to change the password of the tp-link using wifi?

Changing the admin password of tp-link from time to time is very essential to secure it privately. Here, we will discuss some of the steps to change the password of the tp-link using wifi are the following:

• First, go to the Admin Panel of your tp-link Router.
• After redirecting to the admin panel choose Wireless and then Wireless Security in the sub-menu.
• In the submenu choose the WPA-PSK/WPA2-PSK option.
• In the Pre Shared Key Password field, enter your new Wi-FI admin Password. (which including 8-63 characters, alphabets, digits, and some special symbols)
• Now, click on the Save button to update the change of the tp-link router.

3. How to change the Login password of the TP-link router without using the Wi-Fi network?

Steps to change the login password of the TP-link router without using a wifi network are the following:

• Log in to the Admin Panel of the tp-link router.
• After logging in, go to the Management option then choose Access Control and select Password there.
• Enter your previous password and then enter your new password & re-enter it again for better security.
• Click on the Apply button to save the changes successfully.

Conclusion

After analyzing all about the TP-Link router login process, we conclude that,  If you are using a TP-Link router or another model of it that uses a 192.168.0.1 Ip address for login details, it is essential to keep it secure. sharing a network with an unknown host may be dangerous for your device if any unauthorized person will access it.

For that, you have to take the help of different 192.168.0.1  admin logins such as TP-Link, Comcast, Cisco, SMC, and Netgear Routers to keep it safe and secure privately.