Hitron Router Login – Default IP, User ID, Password

One of the most popular router brands Hitron has a simple user interface that is easy to access and use. In the article below, we will tell you the procedure of Hitron Router Login and reset their administrator user name and password accordingly.

192.168.0.1 is the Default Ip address of the Hitron Router used By different routers privately in your home area. This IP address is used to set Default Local Ip Host for configuration,  change their Settings & Services. Some routers like Belkin, Linksys, Cisco, Edimax, SMC & Siemens also used this IP address to log in to their specific routers.

Steps for Hitron Router Login

There are various steps for Hitron Router Login, which are the following:

1. Open your web browser
2. Enter the respective login details
3. Change the default id and  password

1. Open your web browser

To login to Hitron Router, first, open your specific web browser(preferred wireless). Enter the default IP address http://192.168.0.1 in your address bar. Instead, you can also click the link below.

2. Enter the respective login details

In this step, you have to enter the respective Hitron router login details like username and password, which are as shown below:

Username: cusadmin
Password: password

After entering the details, click on the enter to redirect on control panel of your router.

3. Change the password

If you want to change the password of Hitron router follow this steps:

1. First, choose the wireless option in the menu bar(left side of the page) of the Hitron router
2. Then, click on the security option
3. In this option, you see the pre-shared key field, where you see your default password
4. If you want to change the password, enter the new password in the pre-shared key field and click on the apply button

Note: If you directly find your password without changing click on cancel button

Once you saved changes, you will be logged out from your network.

Default login details of Different Hitron Router Models

MODEL	DEFAULT USERNAME	DEFAULT PASSWORD	DEFAULT IP ADDRESS
CGNM-2252	cusadmin	password	http://192.168.0.1
CGNV	cusadmin	password	http://192.168.0.1
CGNV2	cusadmin	password	http://192.168.0.1
CHITA	cusadmin	password	http://192.168.0.1
CODA-4589	cusadmin	password	http://192.168.0.1
CODA-4782	cusadmin	password	http://192.168.0.1

Troubleshooting (FAQ for Hitron Router Login)

How to change the password of the Hitron Router?

If you want to change the password of hitron router follow this steps:

• First, choose the wireless option in the menu bar(left side of the page) of the Hitron router
• Then, click on the security option
• In this option, you see the pre-shared key field, where you see your default password
• If you want to change the password, enter the new password in the pre-shared key field and click on the apply button

Following the steps will easily help you in changing the default password of your router. If you already know the password, you don’t need to change it.

What is the WPS button on Hitron Router

WPS button situated at the front of the modem. By Pressing this button we are able to start the procedure of WiFi Protected Setup (WPS) Push-Button Configuration (PBC) accordingly.

What lights should be used in the Hitron Router?

Modem lights used in Hitron Router are the following:

Modem Light	Status	Problem
Status	Solid Blue	None – need to establish a connection
LAN	Green Blinking	None – data is flowing between the internet and computer
	Solid Green	None – connected via LAN device, like a pc or any router
	Solid Blue	None – connected via LAN device, like a pc or any router

How do i check my Hitron IP router address

To check the Hitron IP router address, first type ipconfig in the command prompt and then press enter tab to run the command. Scroll until when you can see the setting of your ethernet. This will be the router where you see your default IP address. 

How to find IP Address for Hitron Router

Generally, the IP address for the Hitron Router is 192.168.0.1. But if you are unable to find out the IP address then follows the steps as shown below:

• First, click on the system preferences from the setting tab
• In the menu bar of the system, preference select the advanced option
• From the advance, tab click on Network, where the default IP address for the specific modem is listed as TCP/IP.
•  After that, click on setting and go to WLAN
• In the WLAN option, select the details option where you find your respective IP address easily.

Settings management of Hitron Router

Setting of Hitron Router can be done in two ways:

1. SmartWifi (without SmartSecurity)
2. SmartWifi (with SmartSecurity)

1. SmartWifi (without SmartSecurity)

Hitron settings can be managed using SmartWiFi (without SmartSecurity) and Business Internet where the login information is directly shown on your device.

2. SmartWifi (with SmartSecurity)

SmartWiFi (with SmartSecurity) is also the other option to manage settings by the Meraki Dashboard. 

How to reset your Hitron Router?

• If you want to Reset your hitron router, hold the reset button for  10 seconds
•  If you want to work on a factory reset on your pc then holding the button for another 10 seconds to restore all the default factory settings at that time is essential to unplug the power of your gateway.
•  While holding the reset button down, turn on the power of your router and hold it for more than 10 seconds.
•  Your device Hitron is now in the mode of reset to its brand new factory settings.

Conclusion

After analyzing all about the Hitron router login, we conclude that,  If you are using a Hitron Business router that uses a 192.168.0.1 Ip address for login details, it is essential to keep it secure. sharing a network with an unknown host may be dangerous for your device if any unauthorized person will access it.

For that, you have to take the help of different 192.168.0.1 IP address Admin Login to Hitron Router, Cisco, SMC, and Netgear Routers to keep it safe and secure privately.