AT&T Router Login – Default IP, User ID, Password

AT&T Router Login: AT&T routers are mainly used to provide service for smartphone and internet users. One of the real examples is U-Verse. This allows their clients to access LAN, television cable, and internet with the help of a router. 192.168.1.1 or 192.168.1.254 is the default IP address of at&t router login.

In this article, we are going to discuss the at&t router login process with default settings. This default setting will be IP address, SSID network, login id, and password printed on the backside of your router. Through the login process, we can check whether You can log in to AT&T either using a Wired connection or wireless connection with the default SSID name and login username password printed to the device sticker. Login into the Router helps you to check its bandwidth, internet speed, access its control panel manager, configure or set up the router, reboot the device, change the admin password and manage the voice service respectively.

Read More:-

• Nighthawk Router Login
• Motorola Router Login
• Comcast Business Router Login

At&T router login process

To know about how to login at&t router follow the steps given below:

1. Connect to an at&t web browser
2. Navigate to a specific IP address
3. Enter the default login details
4. Setup the router settings

1. Connect to an at&t web browser

First, connect your at&t web browser through your area of the network. This connection can be either wired or wireless as you want. But, for better security try to use wireless networks.

2. Navigate to a specific IP address

After reaching the web browser, enter the default IP address  192.168.1.254 using the address bar which is printed on the backside of your router. The official link to the AT&T router is http://192.168.1.254.

3. Enter the default login details

After completing the IP address step, you will now be redirected to the login screen where you have to enter your default login id and password. Default username and password are as shown below:

• Username: admin
• Password:________

Note: When you are on a login page you will not be asked directly for a password. If they ask then leave the page blank and press the enter key.

4. Setup the router settings

Once you complete the whole process, now you will be able to access your router’s web interface and related settings.

How to change the login id and password of at&t router

By default, every router has a unique id and password printer on the backside of a device. If you do not make changes to it, proceed with some technical issues. However, not changing it would expose you to possible hacking and some security issues. Thus, it is always essential to update the login password from time to time. Here, we are discussing some of the steps to change the login id and password of at&t router which are the following:

• First, log in the at&t router page to access its web interface.
• Now, redirect to the Settings option and select LAN than Wi-Fi option available in it.
• Go inside the wifi network and choose the User Network.
• If you want to change your router’s username, then, select the box seen just near to Network Name (SSID) and type the username according to your choice. 
• To change the password, check Use Custom Wi-Fi Network Password and enter the strong password(including letter, symbols, numbers, and special characters)as you want.
• Click on the Save button to update the changes successfully.

Some Frequently asked questions about AT&T Router

1. How to Reset the AT&T router

Resetting the router is required when you forgot the login id and password or aren’t able to login due to an internet connection. Here, we are telling you about some steps to reset the router which is as shown below:

• First, look for the Reset button which is mainly available at the backside of the Power port of your device.  
• After finding the reset button, hold the button for at least 15 seconds with the help of any thin object like a needle or pin and then release it. Releasing the button before the lapse of 15 seconds will reboot the modem but it will not reset.
• Wait till your business gateway does not start again and all the light of the device is not on. 
• When the above step is completed your modem is in the mode of reset and you can start your work.

2. How to reboot an At&T router

We can reboot an at&t router in two ways

1. Using the Router’s Menu
2. Using the Power Cord

1. Using the Router’s Menu

Steps to reboot At&T router using the router’s menu are as shown below:

• First, Log in to your web browser and Turn off every device that is connected to the at &t modem.
• Select the “Device” menu on the top of the screen.
• Inside the “Device” submenu, select the “Restart Device” option.
• After clicking on it, your router will automatically reach the reboot mode
• When you turn on the lights of your device you find that it will be solid green, 
• Now, check your internet connection and restart it again.

2. Using the Power Cord

To reboot the device using a power cord is one of the easiest ways. Because here you don’t need to log in to the router or the Smart Home Manager. Some of the steps to reboot the device using a power cord are the following:

• First, Turn off all devices connected to the at & t router network.
• Then, Turn off the router itself using the on or off button. If your router doesn’t display any button and leave the step.
• Once your router reaches the off mode, unplug the router device.
• Wait for at least 10-15 seconds.  
• Now, connect the router into a plug again and turn on the router button.
• Now, your device is in the mode of the reboot, check your internet connection and restart it again.

Conclusion

After discussing all the at&t router login, we conclude that, if we follow the at&t router login process step by step then you can make setup of your device easily with the help of this article. Here, we have tried to add all topics related to at&t router login that clear all your doubts.